You should look for a well-designed control mechanism that is ergonomically sound and use T-handles. They are simple to use and intuitively designed in the shape of a small T. You can grab the top of the T-handle and spin it to activate any machine to which it is attached. While T handles look identical, they can be purchased in a range of configurations.

1. Studded

Studded T-handles that have a stud insert are different from other types of T-handles because they include a stud. The stud insert consists of a threaded tube that is attached to the handle’s base. T-handles equipped with studs such as this one can be used to attach a threaded hole to machines or other work pieces.

2. Taped

For your convenience, you can also find T-handles that are tapped. T-handles that are tapped don’t have a stud inside. Instead, the handle’s base has a threaded opening and is tapped. This means that it has an insert for a stud. Tapped T-handles are useful in situations when the machine, workpiece, or another type of threaded fastener is present. A T-handle that has already been tapped can be attached by a threaded bolt or screw.

3. Locking

There’s a chance that T-handles will have locks on them. Locking T-handles are those T-handles that already have a lock attached to them. In most cases, the lock will be located at the center of the handle. Since T-handles are designed to be turned, locked T-handles can be turned in both unlocked and default positions. Once the lock has been installed, you can lock it. Most locking T-handles have a lock that can be opened with a key. It can be locked in place by inserting your key into its center, then spinning it to secure it.

4. Extra-Clearance

Another example of this type of handle is also the extended clearance T-handle. Extra-clearance T-handles are great for situations where space is limited. Space consumption can result from the use of any T-handle. Extra-clearance T-handles are compacter to their counterparts. This results in less space. Although they retain a handle in the shape of a “T”, the length of this T-handle is shorter that the majority of T-handles.

5. Through-Hole

T-handles can also have through holes. Through-hole T-handles can also refer to as T-handles. This is because they have a threaded opening that runs through their handle. They are similar to T-handles that have been tapped. T-handles can have either a through-hole or a tapping hole. They all have threaded holes. Tapped T-handles, however, have only a partially threaded opening in the middle of the handle. A T-handle may have a threaded hole underneath it if it has been tapped. A through-hole T-handle, on the other hand, has a threaded hole that runs the entire length of the handle.

There are many options available when you shop for T-handles. The terms studded and tapped refer to a variety of T-handles that are quite common.